Example models
Complete, solved pipe networks you can open in your browser — the same templates the editor offers when you start a new project. Each example page shows the solved results and opens the live model in the sandbox.
General / HVAC
Simple Loop
Pump-driven recirculating loop with elbows
- • Closed loop — no boundary, pure pump-vs-friction balance
- • Copper tube with Crane TP-410 auto elbows
Compressed air
Compressed Air
Pressurized air distribution with tee split
- • Isothermal compressible flow with real density variation
- • Crane TP-410 auto-K tee at the solved flow split
Process cooling
Cooling Water
Pump, reducer, and elevation change circuit
- • Static lift + friction + fitting losses balanced against pump head
- • Crane TP-410 auto-K reducer and globe valve
Building services
Booster Pump to Roof Tank
Curve-mode booster lifting water 25 m through a check valve
- • Pump curve operating point solved, not assumed
- • NPSH available reported against the pump's NPSHr
Water utilities & process plants
Industrial Water Ring Main
Looped plant distribution ring with four process demands
- • True looped network — demands fed from both directions
- • Flow reversal solved natively (negative flows on two ring legs)
Gas distribution
Natural Gas Letdown Station
PRV drops a 16 bar spur to a regulated 4 bar distribution main
- • PRV opening solved to hold the 4 bar setpoint (Kv reported)
- • ISO 5167 orifice meter with Re-consistent discharge coefficient